HI8734 TDS Meter • One-point calibration • Waterproof The HI8734 has not only been specically designed for the water conditioning industry, but particularly for water softening, demineralization, reverse osmosis and drinking water applications. Three ranges of measurement ensure the highest accuracy possible. All three ranges can be executed at the touch of a button, without having to change the conductivity probe. This makes it very easy to switch applications without having to worry about recalibration. MTC (Manual Temperature Compensation) is also available using a knob on the front panel. For the best protection in the eld, the fourring potentiometric probe is made of rugged PVC. To access di²cult areas, the probe is supplied with a 1 m (3.3’) cable. The ratio between conductivity and TDS is factory set at 0.5. TDS solutions begin on page 5.39 • • Specifications HI8734 Range 0.0 to 199.9 mg/L (ppm); 0 to 1999 mg/L (ppm); 0.00 to 19.99 g/L (ppt) Resolution 0.1 mg/L (ppm); 1 mg/L (ppm); 0.01 g/L (ppt) Accuracy (@25°C/77°F) ±1% F.S. (excluding probe error) Calibration manual, one-point through TDS knob Temperature Compensation manual from 0 to 50°C (32 to 122°F) with ȕ = 2%/°C TDS Factor 0.5 Probe HI76301D four ring conductivity probe with DIN connector and 1 m (3.3’) cable (included) Battery Type / Life 9V / approximately 100 hours of continuous use Environment 0 to 50°C (32 to 122°F); RH max 100% Dimensions 145 x 80 x 36 mm (5.7 x 3.1 x 1.4’’) Weight 230 g (8.1 oz.) Ordering Information HI8734 is supplied with HI76301D conductivity probe, HI70032 1382 mg/L (ppm) calibration solution sachet, battery, instructions and rugged carrying case. Accessories HI710007 blue shockproof rubber boot HI710008 orange shockproof rubber boot 5 Conductivity / TDS 5.33 www.hannainst.com | portable
RkJQdWJsaXNoZXIy MTI3NTM=