80000 µS/cm Bottles Code EC Value @25°C Size Package FDA Bottle Certificate of Analysis HI7034/1L 80000 µS/cm 1 L 1 bottle HI7034L 80000 µS/cm 500 mL 1 bottle HI7034M 80000 µS/cm 250 mL 1 bottle HI5034-12 80000 µS/cm 120 mL 1 bottle HI8034L 80000 µS/cm 500 mL 1 bottle • • 111800 µS/cm Bottles Code EC Value @25°C Size Package FDA Bottle Certificate of Analysis HI7035/1L 111800 µS/cm 1 L 1 bottle HI7035L 111800 µS/cm 500 mL 1 bottle HI7035M 111800 µS/cm 230 mL 1 bottle HI8035L 111800 µS/cm 500 mL 1 bottle • • EC Calibration Solutions Quality Solutions for Laboratory Applications • Safety Data Sheets · Safety data sheets for all Hanna solutions are available at hannainst.com or upon request. • Expiration date · The production batch number, expiration date, and temperature correlation table are reported on all Hanna calibration solutions. • NIST traceability · Standardized using a conductivity meter and probe calibrated against NIST primary standard solutions or primary standard solutions prepared following NIST guidelines. • Air-tight bottles · Air tight bottle with tamper-proof seal of freshness to ensure quality. • FDA compliant bottles (HI80xx) · Hanna solutions are offered in opaque, light-tight bottles that meet FDA requirements. 80000 µS/cm Calibration Solution The 80,000 µS/cm calibration solution is needed for the proper calibration of instrumentation used to measure high conductivity samples such as wastewater, solutions with suspended solids and plating baths. This calibration solution is also ideal for use in the agroalimentary sector. 111800 µS/cm Calibration Solution This calibration solution is useful to calibrate instrumentation used to measure samples with conductivity higher than 100 mS/cm (100,000 µS/cm). In fact, this solution makes it possible to calibrate instruments that perform under conditions of high salt concentrations. This calibration solution is ideal for use in systems where phase limits have to be detected (e.g. separation of a substance from water), monitoring of bottle washing plants, beverage controls, check of acids or bases in electrodeposition processes and some plating baths. 5 Conductivity / TDS 5.38 | www.hannainst.com solutions
RkJQdWJsaXNoZXIy MTI3NTM=