Setup screen Our extensive setup screen features a host of congurable options such as time, date, temperature units and language for help screens and guides PC Connectivity Logged data can be transferred to a Windows compatible PC with the included HI920015 micro USB cable and HI92000 software. Long Battery Life The display of the meter has a battery icon indicator to show the remaining power. The meter uses four 1.5V AA batteries that provide up to 200 hours of battery life. Specifications HI98193 Dissolved Oxygen Range 0.00 to 50.00 mg/L (ppm); 0.0 to 600.0% saturation Resolution 0.01 mg/L (ppm); 0.1% saturation Accuracy (@25°C/77°F) ±1.5% of reading ±1 digit Calibration automatic one or two point at 100 % (8.26 mg/L) and 0 % (0 mg/L).; manual one point using a value entered by the user in % saturation or mg/L Atmospheric Pressure Range 450 to 850 mmHg Resolution 1 mmHg Accuracy (@25°C/77°F) ± 3 mmHg within ±15% from the calibration point Calibration one point at any in range pressure value Temperature Range -20.0 to 120.0°C; -4.0 to 248.0°F Resolution 0.1°C; 0.1°F Accuracy (@25°C/77°F) ±0.2°C; ±0.4°F (excluding probe error) Calibration one or two point at any in range temperature value Additional Specifications Measurement Modes direct DO; BOD (biochemical oxygen demand); OUR (oxygen uptake rate); SOUR (specific oxygen uptake rate) Barometric Compensation automatic from 450 to 850 mmHg Salinity Compensation automatic from 0 to 70 g/L Temperature Compensation automatic from 0.0 to 50.0 °C (32.0 to 122.0 °F) Probe HI764073 polarographic DO probe with protective sleeve, internal temperature sensor, DIN connector and 4m (13’) cable (included) Logging log-on-demand up to 400 samples PC Connectivity opto-isolated USB (with HI92000 software) Battery Type / Life 1.5V (4) AA batteries / approximately 200 hours of continuous use without backlight (50 hours with backlight) Auto-off user-selectable: 5, 10, 30, 60 min or can be disabled Environment 0 to 50°C (32 to 122°F); RH 100% IP67 Dimensions 185 x 93 x 35.2 mm (7.3 x 3.6 x 1.4”) Weight 400 g (14.2 oz.) Ordering Information All meters are supplied with: HI7040 bi-component zero oxygen solution (230 mL + 30 mL), HI7041S electrolyte solution (30 mL), preformed PTFE membrane caps (2), DO protective cap, O-rings (2), 100 mL plastic beaker (2), HI92000 PC software, HI920015 micro USB cable, 1.5V AA batteries (4), quick start guide, quality certificate and instruction manual in an HI720193 rugged carrying case with custom insert. HI98193 is supplied with HI764073 polarographic DO probe with protective sleeve and 4m (13') cable. HI98193/10 is supplied with HI764073/10 polarographic DO probe with protective sleeve and 10m (33') cable. Accessories HI710034 orange protective rubber boot See page 6.36 for DO solutions and accessories Rugged custom carrying case The HI98193 meter, probe, and all accessories are supplied in the HI720193 rugged carrying case designed to provide years of use. The inside compartment of the carrying case is thermoformed to securely hold and protect all of the components. 6 Dissolved Oxygen 6.28 | www.hannainst.com portable
RkJQdWJsaXNoZXIy MTI3NTM=