HI38040 Iron Test Kit Medium Range with Checker® Disc The HI38040 is a colorimetric chemical test kit that determines the total iron concentration within a 0.0 to 5.0 mg/L (ppm) range. The HI38040 is supplied with all of the necessary reagents and equipment to perform the analysis. The test kit contains enough reagents for perform approximately 100 tests. • Complete setup · All required materials are included with the test kit, such as the glass vials, plastic pipette, reagent packets, and Checker® disc. • High resolution · Readings from 0.0 to 5.0 mg/L are determined to 0.1 mg/L resolution. • Replacement reagents available · There is no need to buy a new kit when reagents are exhausted. The HI38040-100 can be ordered to replace the reagents supplied with the kit. Signicance of Use Iron is naturally present in water in low concentrations, but it reaches high concentrations in wastewater e¿uents. The iron concentration in water needs to be monitored because it becomes harmful above certain levels. In domestic water, for instance, iron can stain laundry, damage kitchenware, favor the growth of certain bacteria, and unpleasantly alter the taste of water. Iron is also an indicator of ongoing corrosion in water cooling and heating systems. Moreover, iron is normally monitored in mining wastewater to avoid contamination. HI38041 Iron Test Kit High Range with Checker® Disc The HI38041 is a colorimetric chemical test kit that determines the total iron concentration within a 0.0 to 10.0 mg/L (ppm) range. The HI38041 is supplied with all of the necessary reagents and equipment to perform the analysis. The test kit contains enough reagents for perform approximately 100 tests. • Complete setup · All required materials are included with the test kit, such as the glass vials, plastic pipette, reagent packets, and Checker® disc. • High resolution · Readings from 0.0 to 10.0 mg/L are determined to 0.2 mg/L resolution. • Replacement reagents available · There is no need to buy a new kit when reagents are exhausted. The HI38041-100 can be ordered to replace the reagents supplied with the kit. Signicance of Use Iron is naturally present in water in low concentrations, but it reaches high concentrations in wastewater e¿uents. The iron concentration in water needs to be monitored because it becomes harmful above certain levels. In domestic water, for instance, iron can stain laundry, damage kitchenware, favor the growth of certain bacteria, and unpleasantly alter the taste of water. Iron is also an indicator of ongoing corrosion in water cooling and heating systems. Moreover, iron is normally monitored in mining wastewater to avoid contamination. Specifications HI38040 Iron (Fe¯+ & Fe®+) Type checker disc Range 0.0-5.0 mg/L (ppm) Smallest Increment 0.1 mg/L (ppm) Method phenanthroline Number of Tests 100 avg. Ordering Information HI38040 test kit comes with 100 packets iron reagent, checker disc, glass vials with caps (2) and 3 mL plastic pipette. Reagent HI38040-100 iron MR, 100 tests avg. Specifications HI38041 Iron (Fe¯+ & Fe®+) Type checker disc Range 0.0-10.0 mg/L (ppm) Smallest Increment 0.2 mg/L (ppm) Method phenanthroline Number of Tests 100 avg. Ordering Information HI38041 test kit comes with 100 packets iron reagent, 500 mL deionized water, checker disc, glass vials with caps (2), 3 mL plastic pipettes and long plastic pipette. Reagent HI38041-100 iron HR, 100 tests avg. Chemical test kit reagents begin on page 9.44 9 Chemical Test Kits 9.24 | www.hannainst.com
RkJQdWJsaXNoZXIy MTI3NTM=