HI38001 Sulfate Test Kits Low and High Range The HI38001 is a chemical test kit that determines the sulfate concentration in two ranges: 100 to 1000 mg/L and 1000 to 10000 mg/L. The HI38001 is supplied with all of the necessary reagents and equipment to perform the analysis. The test kit contains enough reagents for perform approximately 200 tests. • Complete setup · All required materials are included with the test kit, such as the sample beakers, syringes, and reagent bottles and packets. • High resolution · Readings from 100 to 1000 mg/L are determined to 10 mg/L resolution. · Readings from 1000 to 10000 mg/L are determined to 100 mg/L resolution. • Replacement reagents available · There is no need to buy a new kit when reagents are exhausted. The HI38000-10 can be ordered to replace the reagents supplied with the kit. Signicance of Use Sulfate is widely present within natural waters in dierent concentrations. Sulfate concentration is to be kept within a strict range for drinking water, especially since this value can be high near mine drainage points. Sulfate is also rigorously tested in the production of beverages such as beer, due to its signicant eect upon odor and taste. HI3822 Sulte Test Kit The HI3822 is a chemical test kit that determines the sulte concentration in two ranges: 0 to 20 mg/L and 0 to 200 mg/L Na«SO¦. The HI3822 is supplied with all of the necessary reagents and equipment to perform the analysis. The test kit contains enough reagents for perform approximately 110 tests. • Complete setup · All required materials are included with the test kit, such as the sample beakers, indicator and reagent bottles, and calibrated syringe. • High resolution · Readings from 0 to 20 mg/L are determined to 0.2 mg/L resolution. · Readings from 0 to 200 mg/L are determined to 2 mg/L resolution. • Replacement reagents available · There is no need to buy a new kit when reagents are exhausted. The HI3822-100 can be ordered to replace the reagents supplied with the kit. Signicance of Use There are many reasons to monitor the concentration of sulte in water. In boiler feed and e¿uent waters, a sulte concentration of approximately 20 mg/L must be maintained to prevent pitting and oxidation of metal components. A high level of sulte results in a lowered pH, thus promoting corrosion. The monitoring of sulte is important in environmental control as well. Sulte ions are toxic to aquatic lifeforms; the chemical demand that sulde produces on oxygen in water can destroy the delicate ecological balance of lakes, rivers and ponds. Specifications HI38001 Sulfate (as SO¬¯²) Type titration Range 100-1000 mg/L (ppm) 1000-10000 mg/L (ppm) Smallest Increment 10 mg/L (ppm) 100 mg/L (ppm) Method barium chloride Number of Tests 200 avg. Ordering Information HI38001 test kit comes with 100 packets sulfate reagent A (2 sets), 100 mL LR sulfate reagent B, 100 mL HR sulfate reagent B, 10 mL sulfate reagent C, 25 mL complexing agent, 30 mL sulfate solution, 50 mL plastic vessels (2) and 1 mL syringes (2). Reagent HI38001-10 sulfate LR/HR, 100 tests avg. Specifications HI3822 Sulfite (as Na«SO¦) Type titration Range 0.0-20.0 mg/L (ppm) 0-200 mg/L (ppm) Smallest Increment 0.2 mg/L (ppm) 2 mg/L (ppm) Method iodometric Number of Tests 110 avg. Ordering Information HI3822 test kit comes with 30 mL sulfamic acid solution, 30 mL EDTA reagent, 15 mL sulfuric acid solution, 10 mL starch indicator, 120 mL titrant solution, 20 mL calibrated vessel, 50 mL calibrated vessel and calibrated syringe with tip. Reagent HI3822-100 sulfite (as Na«SO¦), 110 tests avg. Chemical test kit reagents begin on page 9.44 9 Chemical Test Kits 9.30 | www.hannainst.com
RkJQdWJsaXNoZXIy MTI3NTM=