heating Outer casing stays cool to the touch! Specifications HI839150 Temperature Range 20.0 to 160.0 °C (68 to 320 °F) Set Temperature Programs 105 °C and 150 °C Accuracy ±2 °C Temperature Stability ±0.5 °C Capacity 25 vials; Ø 16 mm x 100 mm (Ø 0.63” x 3.94”) Reference temperature probe well Warm-up Time about 10 minutes, depending on selected temperature Digestion Time 1 to 180 minutes Environment 5 to 50 °C (41 to 122 °F) Power Supply (fuse protected) 115 Vac (HI839150-01) 230 Vac (HI839150-02) Dimensions 190 x 300 x 95 mm (7.5 x 11.8 x 3.7”) Weight approximately 4.8 kg (10.6 lb.) Ordering Information HI839150-01 (115 Vac, USA plug) and HI839150-02 (230 Vac, European plug) is supplied with HI740217 laboratory safety shield; power cable, quick reference guide with instructions for manual download, and instrument quality certificate. HI839150 COD Reactor with 25 Vial Capacity The HI839150 is a robust 25 vial capacity thermo-reactor for COD determination of industrial wastewater. The reactor has two stored digestion temperature programs that support analysis methods at: · 150 °C (COD methods, Iron Total, Phosphorus Acid Hydrolyzable, Phosphorus Total methods) · 105 °C (Chromium (VI) and Total, Nitrogen Total methods) • Laboratory safety shield included · The included safety shield is highly recommended to use during vial digestion procedure to maintain a safe working environment • Reactor block temperature continuously evaluated and displayed • Built-in countdown timer · A timer of up to 180 minutes is included for applications that require timed digestions. The end of the digestion time is signaled by 5 short acoustic beeps and “DONE” message is displayed. The heating is turned off and the block begins to cool off. • Status indicator lights · POWER (on) · HOT (surface) · HEATING (in progress) • Overheating prevention • Reference temperature probe well · A small temperature well can accommodate a temperature probe, useful for verifying the heating block. • Warnings and error messages · The instrument displays warning messages when erroneous conditions appear and when values are outside the expected range such as high or low temperature, hot surface, or heating system malfunction. HI740216 Test Tube Cooling Rack HI740217 Lab Safety Shield Use of HI740217 safety shield (included) and HI740216 cooling rack (not included) is strongly recommended. 11 COD and Vials 11.38 | www.hannainst.com
RkJQdWJsaXNoZXIy MTI3NTM=