Freeze protection mode • Air Temperature measurement triggers relay to activate the recirculation pump to prevent water freezing in the pipes Log feature • Automatic logging of pH / ORP /air & solution temperature measurements • Configurable logging interval: 30 seconds 1; 5; 15; 30; 60 minutes • 300 days logging, depending on selected logging interval (capacity of 100 lots) • Recall data displayed as a plot 7 days or 6 hours zoom options overview of (History/Details) measure range registered values i.e. minimum, maximum, average • Logged event type: setup / alarms / errors / warnings / calibration / power outage (capacity of 100 records, oldest record being overwritten) • Export to USB flash drive (USB-C port) of log files in CSV format BL132 Cloud connectivity The BL132 connects to Hanna Cloud via secured connection. Features: • Device identity registry • Policy-based authorization of security keys The BL132 sends status information toHanna Cloud with a defined period. • Readings: pH / ORP / Temperature • Events: Alarms / Warnings / Errors • Peripherals status: LEDs • Last dosed acid and chlorine volumes • GLP info Setup information is sent or configured on the Hanna Cloud. Configured data • Alarm settings • Dosing settings • General settings • Remote Hold mode Read data • System information: • Meter – model, FW version, OS version, serial number • Probe – type, FW version, serial number “Remote Hold” mode (configured remotely) • emergency mode, remotely triggered via web application • pumps deactivation mode • canceled manually from the controller menu BL132 Ethernet input RJ-45 Ethernet connector (10/100 Mbps connection) Additional specifications Meter password protection • Password protected setup, calibration, and log recall USB-C port • Data export to USB flash drive • Software update GLP pH and ORP Alarm system • Intuitive alert system based on LED color coded alarm system • Alarm filtering options • Alarm relay control based on user setup filters Relays • Alarm relay (SPDT) – activated by selectable pH / ORP / Temperature alarm conditions • Auxiliary Acid / Base pump relay (SPST) • Auxiliary Chlorine pump relay (SPST) • Recirculation pump relay (SPDT) • All relays are fuse protected with 2A time delay 5x20mm cartridge fuses. To be replaced only with time delay glass/ceramic 5x20mm cartridge fuse of same rating. • All relays are rated for 250VAC / 30VDC 2A resistive load. Note: For inductive loads, an appropriate external snubber circuit must be connected to prevent relay contact damage. Analog outputs (BL131) • 3 × galvanically isolated, user configurable 4-20mA outputs • Current sensing resistor ≤ 500 Ω • Accuracy < 0.5 % FS Three digital inputs • 3× galvanically isolated, powered contact, digital input • Low level acid / base tank (contact open) • Low level chlorine tank (contact open) • Hold mode (contact open) Probe input • Galvanic isolated • RS485 interface • HI1036-1802 multiparameter digital probe is equipped with: pH / ORP / Temperature sensors and a matching pin IP65 connector Power • 100 - 240 Vac; 50/60 Hz; 0.7A Environment • 0-50 °C (32-122 °F) • Maximum 95 % RH non-condensing Dimensions • 245×188×55 mm (73 mm with pumps) • 9.6×7.4×2.2” (2.9” with pumps) Weight 1700 g (60 oz) Casing Wall mounted, internal pumps, IP65 rated Ordering information in-line configuration for direct probe installation into existing piping BL131-10 and BL132-10 is supplied with HI1036-1802 combined electrode (pH / ORP / Temperature), BL130-900 Air temperature probe, electrode fittings, electrode saddle, Ø 50 mm pipe (1 pc.), injector saddle, Ø 50 mm pipe (2 pcs.), Injector (2 pcs.), peristaltic pump tubing (2 pcs.), silicon oil (dropper bottle), PVC aspiration and injection tubing, 10 m, aspiration filter (2 pcs.), 4.01 pH buffer solution, sachet (3 pcs.), 7.01 pH buffer solution, sachet (3 pcs.), 470 mV ORP test solution, sachet (3 pcs.), power cable, quick reference guide with QR code for manual download, quality certificates (instrument, probes, accessories). Flow cell configuration for calibration and probe maintenance whilst maintaining the recirculation pump running BL131-20 andBL132-20 is supplied with HI1036-1802 combined electrode (pH / ORP / Temperature), BL130-900 air temperature probe, panel mounted flow cell, flow cell panel, valve for flow cell connection and fittings (2 pcs.) with 10 m tubing, valve saddle, Ø 50 mm pipe (2 pcs.), injector saddle, Ø 50 mm pipe (2 pcs.), injector (2 pcs.), peristaltic pump tubing (2 pcs.), silicon oil (dropper bottle), PVC aspiration and injection tubing, 10 m, aspiration filter (2 pcs.), cable gland gaskets, 4.01 pH buffer solution, sachet (3 pcs.), 7.01 pH buffer solution, sachet (3 pcs.), 470 mV ORP test solution, sachet (3 pcs.), power cable, quick reference guide with QR code for manual download, quality certificates (instrument, probes, accessories). * The range (pH & temperature) may be limited by the probe’s limits. 15 Process Instrumentation 15.19 www.hannainst.com | controllers
RkJQdWJsaXNoZXIy MTI3NTM=